Hi - Fi Stand

I decided to make a stand which is not higher than 1000 mm (approximately) and also wider .I have some equipment basically placed on the floor.

It's sort of a commercial stand rather than a hi end Hi Fi stand, but definitely more

effective with my setup.

Parts.

1) MDF 25 mm x 2420mm (4 off)

2) Threaded rots 24mm x 1100mm

3) Bolt, washers, nuts, 24 mm

I was going to place a spring under every shelf but I'm having trouble to find a good price for roughly 50 springs which would suit 24 mm threaded rot.